libiec Directory Reference

Files
file	sys/libiec/.cvsignore [code]
file	checkdevice.c [code]
	Fast IEC drive detection: Check if there is some device attached, and the bus is not blocked.
file	sys/libiec/debug.c [code]
	Debug helper functions for libiec.
file	dpc.c [code]
	DPC handle for the IEC bus.
file	eoi.c [code]
	Check if an EOI signal has been sent over the IEC bus.
file	i_iec.h [code]
	Internal functions and definitions of the libiec library.
file	i_rawread.c [code]
	Read some bytes from the IEC bus, internal version.
file	i_rawwrite.c [code]
	Write some bytes to the IEC bus, internal version.
file	libiec/init.c [code]
	Initialize the IEC bus.
file	interrupt.c [code]
	Interrupt handler for the IEC bus.
file	listen.c [code]
	Send a LISTEN to the IEC bus.
file	mnib.c [code]
	Nibble a complete track.
file	libiec/openclose.c [code]
	Write one byte to the IEC bus.
file	poll.c [code]
	Write one byte to the IEC bus.
file	ppread.c [code]
	Read a byte from the X[M|A]P1541-cable.
file	ppwrite.c [code]
	Write a byte to the X[M|A]P1541-cable.
file	rawread.c [code]
	Read some bytes from the IEC bus.
file	rawwrite.c [code]
	Write some bytes to the IEC bus.
file	release.c [code]
	Release a specific line on the IEC bus.
file	releasebus.c [code]
	Release the IEC bus.
file	reset.c [code]
	Send a RESET on the IEC bus.
file	sendbyte.c [code]
	Write one byte to the IEC bus.
file	set.c [code]
	Set a specific line on the IEC bus.
file	setrelease.c [code]
	Set a specific line on the IEC bus.
file	talk.c [code]
	Send a TALK to the IEC bus.
file	unlisten.c [code]
	Send an UNLISTEN to the IEC bus.
file	untalk.c [code]
	Send an UNTALK to the IEC bus.
file	libiec/util.c [code]
	Some utility functions for the IEC library.
file	wait.c [code]
	Wait for listener to signal that it is ready to receive.
file	waitlistener.c [code]
	Wait for listener to signal that it is ready to receive.

---